How many square meters is required for battery connection line of electric car
Wed Jan 11, 2023 7:14 am
For small cars, the starting standard of pure copper is 16 square meters. But if it is a large engineering vehicle, it should be mentioned again. The recommended national standard pure copper is 25 square meters. If it is lower than the recommended value, it is difficult to jump start the engine.
With a certain power and voltage, the thicker the wire, the smaller the resistance, and the greater the current finally transmitted to the motor. It is recommended to use thicker wires or bundle two thin wires together. If it is not specially noted, it is generally standard 16m2 copper wire, and if it is specially noted, it requires 25m2 copper wire.
Extended information (precautions for use of car battery):
Ensure that the auxiliary battery is 12 V and that the negative terminal is grounded. Of course, all unnecessary lights and accessories should be turned off to avoid electric accidents.
Do not connect the positive and negative poles of the cable reversely, otherwise sparks will jump out during the connection, and we also need to wrap the cable and the battery tightly (fully contact) to avoid the fire during the connection.
Start the engine of the auxiliary battery vehicle and run the engine at medium speed. Then start the engine of the vehicle with the discharged battery.
Recommended products related to OMG charging pile cable,please visit or search: omgevcable
With a certain power and voltage, the thicker the wire, the smaller the resistance, and the greater the current finally transmitted to the motor. It is recommended to use thicker wires or bundle two thin wires together. If it is not specially noted, it is generally standard 16m2 copper wire, and if it is specially noted, it requires 25m2 copper wire.
Extended information (precautions for use of car battery):
Ensure that the auxiliary battery is 12 V and that the negative terminal is grounded. Of course, all unnecessary lights and accessories should be turned off to avoid electric accidents.
Do not connect the positive and negative poles of the cable reversely, otherwise sparks will jump out during the connection, and we also need to wrap the cable and the battery tightly (fully contact) to avoid the fire during the connection.
Start the engine of the auxiliary battery vehicle and run the engine at medium speed. Then start the engine of the vehicle with the discharged battery.
Recommended products related to OMG charging pile cable,please visit or search: omgevcable
- OMG EV cable manufacturer shielded braided flexible 70 square meters suitable for electric vehicle factory electric vehicle battery factory automation cable
- Application of 120 square meters of aluminum core conductor automotive high-voltage shielded cable
- How large charging cable is required for electric vehicle charging pile of 7kw
- New energy vehicle equipment connection 6 square cable application
- Application of automotive battery system manufacturing connection technology
Permissions in this forum:
You cannot reply to topics in this forum